High-Powered Car Amplifier!

Crank up mega doses of power into your car's audio system with this Sony Xplod XM-GTX1852 2/1-Channel In-Car Power Amplifier! The XM-GTX1852 delivers a maximum power output of 380-watts per channel (can be used as a monaural amplifier with a maximum output of 1000W) and offers a dual-mode connection for setting up a multi-speaker system!

It features a built-in low-pass filter and comes with a high level sensing power on feature that activates the unit without the need for a remote connection. This Sony Xplod XM-GTX1852 2/1-Channel In-Car Power Amplifier is the perfect complement to any car audio system! Order now!

 Features:

• Black color
• Maximum power output of 380-watts per channel
• Unit can be used as a monaural amplifier with a maximum output of 1000W
• Dual mode connection possible for a multi-speaker system
• Built-in Low-pass filter (80 Hz, 18 dB/oct)
• Hi-level Sensing Power On feature allows unit to be activated without the need for a remote connection
• Pulse power supply for stable and regulated output power
• Direct connection can be made with the speaker output of your car audio unit, if it is not equipped with the line output (High level input connection)
• Circuit System:
• OTL (output transformer less)
• Circuit
• Pulse power supply
• Input Level Adjustment Range:
• 0.3 – 6 V (RCA pin jacks)
• 1.2 – 12 V (High level input)
• Outputs:
• Speaker terminals
• Speaker Impedance:
• 2 – 8 Ω (stereo)
• 4 – 8 Ω (when used as a bridging amplifier)
• Maximum Output:
• 380 W x 2 (at 4 Ω)
• 1,000 W (BTL, at 4 Ω)
• Rated Output (supply voltage at 14.4 V, 20 Hz – 20 kHz, 1 % THD + N):
• 185 W RMS x 2 (at 4 Ω)
• 200 W RMS x 2 (at 2 Ω)
• 400 W RMS (BTL) (at 4 Ω)
• Other Specifications:
• Frequency response: 5 Hz – 50 kHz ( dB)
• Harmonic distortion: 0.06 % or less (at 1 kHz, 4 Ω)
• Low-pass filter: 80 Hz, 18 dB/oct
• Power requirements: 12V DC car battery (negative ground)
• Power supply voltage: 10.5 – 16 V
• Current drain at rated output: 45 A (4 Ω, 185 W x 2)
• Remote input: 1 mA
• Connectors:
• LPF (80 Hz) on/off switch
• Level adjustment
• L/R RCA input
• High Level Input connector
• Power/Protector indicator light
• Speaker out connectors
• Two (2) 30A fuses
• REM connector
• +12V connector
• GND (Ground) connector